Risson Marvell 18E Tube Amplifier

Image

Legendary Al Perkins With The Marvel 18E ⇓

Risson Marvell 18E Amplifiers produce a classic, vintage sound using quality parts and hand craftsmanship.

They have a big, full sound, but are surprisingly compact and light weight.

Our amps give you an uncompromised, British heavy crunch, or deliver a lead at a peak level perfect for the studio.

Our design allows for overdrive at a low level for a wide open heavy rock sound, yet performs just a s well for a sustained country rock sound.

It can also be set for a clean and warm guitar performance.

Risson Marvell 18E:  Bringing vintage sound to your performance.

Tube Configuration

– Two 7025/12AX7 Dual Purpose Tubes

– Two KT77 or EL90 Power Tubes

Output:

– Two Output Transformers works with 4, 8, and 16 ohm (recommended 8 ohm)

– Wattage varies depending on speaker load

– Clean to Overdrive = 9 to 18 watt

Design

Single channel with both high and low gain input jacks

Front Panel Controls

Two Phone Jacks, Volume, Master Volume, Treble, Middle, Bass, Voicing Select On/Off

Back Panel Features

Two Output Jacks, Fuse Post. Ground Switch, Gain, Boost Foot Pedal Jack, AC Cord Connector

Note: The listed features vary slightly on the original Marvell 18V Model

Dimensions and Weight

Amp Head Unit

H: 9.5″ x W: 19.5″ x D: 9.5″; 19lbs.

Speaker Enclosure

H: 20.5″ x W: 20.5″ x D: 12″; 29lbs.

Available in single 12″, dual 10″, or four 8″

Constructed with pine, using finger joints.

This can be ordered with a closed back or an open back.


Image

Image

Dulaney And Company